KOLSOL F02 Underground Cable Wire Locator is designed to locate the path of non-energized wires behind walls and underground. The KOLSOL F02 also capable of locating a specific circuit breaker, pinpointing wires before drilling and verifying dig sites underground. The effective range is up to 3 feet deep and up to 1000 feet in length.
AT226-C LAN cable tester capable to test open, short, cross connection, perform crosstalk test on network cable. It can quickly find the targeted cable without stripping isolation among unknown cables. Measure length of network cable, coaxial cable, telephone cable.
AT239 equips multiple RJ45 tester ports and is designed to detect a wide range of cable including 5E/6E, STP/UTP network cable, coaxial cable, telephone line. It is capable to perform various test including cable sequence & length, user jumper, connection continuity, open/short circuit, reverse connection and cross-talk interference.
AT278 is a must tool for each network technician, provides full cable testing on different category network, coax, or telephone cable, displaying wire map and any faults. Besides, finding cables easier and tracing with AC fliter, or locating network port using hub blink feature. It also tests the presence of PoE and PING functions.
NF-611 is a high quality HDMI cable tester, it can check miswires, short, open and cross status of HDMI cables, displays 19 pin-to-pin and shield connection status on both main and remote unit.
NF-813C is a cable tracker for RJ45 & RJ11& BNC, it can quickly finding the required line pairs among numerous ones, trace cable with continuous and clear tone, AC Current rejection. It also can tests physical connection status of network cable.
The Multi-protocol Cable Tester - NF-3468 is a Remote Cable Tester, Palm sized unit with four types of connector: RJ45, RJ11, USB and BNC.This unit can be used to verify the condition of cables both before and after their installation. The separate passive module is connected to the remote end of the installed cabling.
AT112 is the latest instrument with great and full functions of cable hunting, sorting and circuit status testing. It is composed of a main tester, a receiver and 8 remote identifiers. The 8 far-end test jacks (ID1~ID8) at the remote identifiers allows cable locating more quickly and conveniently.
NF-309 can measure the cable material & resistance (for cat5e, cat6e & non-standard land cable) and cable length, trace and locate RJ45 Coaxil cables and electronic without AC current noise.
NF-8601 capable to test open, short, cross connection, perform crosstalk test on network cable, quickly find the targeted cable without stripping isolation among unknown cables.It is mainlly used to measure length of network cable, coaxial cable, telephone cable.
NF-8108 is a portable unit with long battery life, supports measure network cable length and determine the distance of broken point, check wiring error in 5E, 6E, such as open circuit,short circuit, jumper wire, reverse connection .
MS6813 is a multifunctional handheld cable testing tool, can be used for integrity testing of twisted pair cable network, can also be used for installation, inspection and maintenance of various cable lines, and for the telephone line, telephone line state can be judged in the work, more convenient for telephone line installation, commissioning and maintenance work.
NF-308 is composed of tester, receiver and remote identifier. It is provided with fluent appearance, excellent hand feel and considerate human-centered design. It owns three great functions of hunting, wire sorting and circuit status testing and the features of quickness and accuracy, thus, it becomes available tool for technicians in installation and maintenance of weak current system, such as, communication line, comprehensive wiring circuit, etc. It is widely applicable to telephone system, computer network, other metal wire circuit and other fields.
NF-838 is a wire Tracker, 5 kinds of cable can be trace located (RJ45/RJ11/BNC/USB/1394). It can test 5E, 6E, telephone, coaxial , USB , 1394 cables and other wires for troubleshooting, 9 different tones for different circuit status.
The 802.3af/802.at PoE (Power over Ethernet) Tester, connected to an RJ45 outlet, allows one to test the live Ethernet cable and determine if power and data are present. And also identifies the type of Power Sourcing Equipment (Either Endspan or Midspan) in your network. This unit is an easy-to-use Power over Ethernet adapter for professionals, business and home users to determine the existence of PoE.
NF-268 Network Telephone Cable Tracker, it can quickly tracing & find Lan/telephone/coax cable which is connected with switch or router, easy to track with complete AC interference rejection. It has the advantages of Noise avoidable, endurable high pressure and self-protection ability.
NF-300 consists of the main tester, receiver and remote afapter parts. It has a variety of line status test functions, such as cable length test line-finding, line crosstalk, breakpoint, etc. Widely used in telephone systems, computer networks and other areas involving metal wire line.
NF-820 wire tracker can locate the ceiling or in the wall wires, find the underground cables, tone trace cable under the floor slab, the ceiling or in the wall. The detection range is 2m and cable length 20km. Tone trace live cable with alligator clip within AC400V high voltage without burning equipment.
NF-858C is a new multifunction wire locator which include main tester,receiver and 4 remotes. It can test, find and test the length of the network and BNC cable, it can also build with a VFL that may help with testing the fiber cable.
NF-8208 cable tester can directly hunt network cable and other cables with cable adaptor, check wiring error in RJ45 cable, it also can test open ,short ,cross, reverse connection for network cable, measure cable length accurately and locate short circuit.